Browse Source

kernel: bump 5.10 to 5.10.63

master
X-osadmin 1 week ago
parent
commit
cda7bb5170
  1. 8
      include/kernel-version.mk
  2. 2
      target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch
  3. 2
      target/linux/bcm27xx/patches-5.10/950-0409-drm-atomic-Pass-the-full-state-to-CRTC-atomic_check.patch
  4. 4
      target/linux/bcm27xx/patches-5.10/950-0689-drm-automatic-legacy-gamma-support.patch
  5. 6
      target/linux/generic/backport-5.10/781-v5.13-net-dsa-mt7530-Add-support-for-EEE-features.patch
  6. 39
      target/linux/generic/backport-5.10/790-v5.15-0001-net-dsa-b53-Fix-calculating-number-of-switch-ports.patch
  7. 43
      target/linux/generic/backport-5.10/790-v5.15-0002-net-dsa-b53-Set-correct-number-of-ports-in-the-DSA-s.patch
  8. 26
      target/linux/generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch

8
include/kernel-version.mk

@ -6,11 +6,11 @@ ifdef CONFIG_TESTING_KERNEL
KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
endif
LINUX_VERSION-5.4 = .142
LINUX_VERSION-5.10 = .61
LINUX_VERSION-5.4 = .143
LINUX_VERSION-5.10 = .63
LINUX_KERNEL_HASH-5.4.142 = 99785728968564ba27c7e552d024b560072dcbc885540912eabb5c021e231451
LINUX_KERNEL_HASH-5.10.61 = 82eae38cc5cd11dd6aaac91c02ff0d006c7bafd6d4cf5c6a791930820a3a91d1
LINUX_KERNEL_HASH-5.4.143 = 0953650b05a5f806d76c5691583e94e141f4f691bc0ba75a60b643740f021d24
LINUX_KERNEL_HASH-5.10.63 = 19a15e838885a0081de5f9874e608fc3f3b1d9e69f2cc5cfa883b8b5499bcb2e
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

2
target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch

@ -171,7 +171,7 @@
#define UDP_CORK 1 /* Never send partially complete segments */
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -273,8 +273,8 @@ nf_ct_get_tuple(const struct sk_buff *sk
@@ -268,8 +268,8 @@ nf_ct_get_tuple(const struct sk_buff *sk
switch (l3num) {
case NFPROTO_IPV4:

2
target/linux/bcm27xx/patches-5.10/950-0409-drm-atomic-Pass-the-full-state-to-CRTC-atomic_check.patch

@ -672,7 +672,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-1-max
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_vblank.h>
@@ -310,12 +311,14 @@ nv50_head_atomic_check_mode(struct nv50_
@@ -315,12 +316,14 @@ nv50_head_atomic_check_mode(struct nv50_
}
static int

4
target/linux/bcm27xx/patches-5.10/950-0689-drm-automatic-legacy-gamma-support.patch

@ -367,7 +367,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi
};
--- a/drivers/gpu/drm/nouveau/dispnv50/head.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/head.c
@@ -501,7 +501,6 @@ nv50_head_destroy(struct drm_crtc *crtc)
@@ -506,7 +506,6 @@ nv50_head_destroy(struct drm_crtc *crtc)
static const struct drm_crtc_funcs
nv50_head_func = {
.reset = nv50_head_reset,
@ -375,7 +375,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi
.destroy = nv50_head_destroy,
.set_config = drm_atomic_helper_set_config,
.page_flip = drm_atomic_helper_page_flip,
@@ -516,7 +515,6 @@ nv50_head_func = {
@@ -521,7 +520,6 @@ nv50_head_func = {
static const struct drm_crtc_funcs
nvd9_head_func = {
.reset = nv50_head_reset,

6
target/linux/generic/backport-5.10/781-v5.13-net-dsa-mt7530-Add-support-for-EEE-features.patch

@ -17,7 +17,7 @@ Signed-off-by: David S. Miller <[email protected]>
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2270,6 +2270,17 @@ static void mt753x_phylink_mac_link_up(s
@@ -2267,6 +2267,17 @@ static void mt753x_phylink_mac_link_up(s
mcr |= PMCR_RX_FC_EN;
}
@ -35,7 +35,7 @@ Signed-off-by: David S. Miller <[email protected]>
mt7530_set(priv, MT7530_PMCR_P(port), mcr);
}
@@ -2500,6 +2511,36 @@ mt753x_phy_write(struct dsa_switch *ds,
@@ -2497,6 +2508,36 @@ mt753x_phy_write(struct dsa_switch *ds,
return priv->info->phy_write(ds, port, regnum, val);
}
@ -72,7 +72,7 @@ Signed-off-by: David S. Miller <[email protected]>
static const struct dsa_switch_ops mt7530_switch_ops = {
.get_tag_protocol = mtk_get_tag_protocol,
.setup = mt753x_setup,
@@ -2528,6 +2569,8 @@ static const struct dsa_switch_ops mt753
@@ -2525,6 +2566,8 @@ static const struct dsa_switch_ops mt753
.phylink_mac_an_restart = mt753x_phylink_mac_an_restart,
.phylink_mac_link_down = mt753x_phylink_mac_link_down,
.phylink_mac_link_up = mt753x_phylink_mac_link_up,

39
target/linux/generic/backport-5.10/790-v5.15-0001-net-dsa-b53-Fix-calculating-number-of-switch-ports.patch

@ -0,0 +1,39 @@
From cdb067d31c0fe4cce98b9d15f1f2ef525acaa094 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
Date: Thu, 2 Sep 2021 10:30:50 +0200
Subject: [PATCH] net: dsa: b53: Fix calculating number of switch ports
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
It isn't true that CPU port is always the last one. Switches BCM5301x
have 9 ports (port 6 being inactive) and they use port 5 as CPU by
default (depending on design some other may be CPU ports too).
A more reliable way of determining number of ports is to check for the
last set bit in the "enabled_ports" bitfield.
This fixes b53 internal state, it will allow providing accurate info to
the DSA and is required to fix BCM5301x support.
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
---
drivers/net/dsa/b53/b53_common.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2556,9 +2556,8 @@ static int b53_switch_init(struct b53_de
dev->cpu_port = 5;
}
- /* cpu port is always last */
- dev->num_ports = dev->cpu_port + 1;
dev->enabled_ports |= BIT(dev->cpu_port);
+ dev->num_ports = fls(dev->enabled_ports);
/* Include non standard CPU port built-in PHYs to be probed */
if (is539x(dev) || is531x5(dev)) {

43
target/linux/generic/backport-5.10/790-v5.15-0002-net-dsa-b53-Set-correct-number-of-ports-in-the-DSA-s.patch

@ -0,0 +1,43 @@
From d12e1c4649883e8ca5e8ff341e1948b3b6313259 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
Date: Thu, 2 Sep 2021 10:30:51 +0200
Subject: [PATCH] net: dsa: b53: Set correct number of ports in the DSA struct
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Setting DSA_MAX_PORTS caused DSA to call b53 callbacks (e.g.
b53_disable_port() during dsa_register_switch()) for invalid
(non-existent) ports. That made b53 modify unrelated registers and is
one of reasons for a broken BCM5301x support.
This problem exists for years but DSA_MAX_PORTS usage has changed few
times. It seems the most accurate to reference commit dropping
dsa_switch_alloc() in the Fixes tag.
Fixes: 7e99e3470172 ("net: dsa: remove dsa_switch_alloc helper")
Signed-off-by: Rafał Miłecki <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
---
drivers/net/dsa/b53/b53_common.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -2559,6 +2559,8 @@ static int b53_switch_init(struct b53_de
dev->enabled_ports |= BIT(dev->cpu_port);
dev->num_ports = fls(dev->enabled_ports);
+ dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
+
/* Include non standard CPU port built-in PHYs to be probed */
if (is539x(dev) || is531x5(dev)) {
for (i = 0; i < dev->num_ports; i++) {
@@ -2603,7 +2605,6 @@ struct b53_device *b53_switch_alloc(stru
return NULL;
ds->dev = base;
- ds->num_ports = DSA_MAX_PORTS;
dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
if (!dev)

26
target/linux/generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch

@ -110,7 +110,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
return -EINVAL;
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -94,6 +94,8 @@ static int ip6_pkt_discard(struct sk_bu
@@ -95,6 +95,8 @@ static int ip6_pkt_discard(struct sk_bu
static int ip6_pkt_discard_out(struct net *net, struct sock *sk, struct sk_buff *skb);
static int ip6_pkt_prohibit(struct sk_buff *skb);
static int ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb);
@ -119,7 +119,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
static void ip6_link_failure(struct sk_buff *skb);
static void ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
struct sk_buff *skb, u32 mtu,
@@ -309,6 +311,18 @@ static const struct rt6_info ip6_prohibi
@@ -310,6 +312,18 @@ static const struct rt6_info ip6_prohibi
.rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP),
};
@ -138,7 +138,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
static const struct rt6_info ip6_blk_hole_entry_template = {
.dst = {
.__refcnt = ATOMIC_INIT(1),
@@ -1030,6 +1044,7 @@ static const int fib6_prop[RTN_MAX + 1]
@@ -1031,6 +1045,7 @@ static const int fib6_prop[RTN_MAX + 1]
[RTN_BLACKHOLE] = -EINVAL,
[RTN_UNREACHABLE] = -EHOSTUNREACH,
[RTN_PROHIBIT] = -EACCES,
@ -146,7 +146,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
[RTN_THROW] = -EAGAIN,
[RTN_NAT] = -EINVAL,
[RTN_XRESOLVE] = -EINVAL,
@@ -1065,6 +1080,10 @@ static void ip6_rt_init_dst_reject(struc
@@ -1066,6 +1081,10 @@ static void ip6_rt_init_dst_reject(struc
rt->dst.output = ip6_pkt_prohibit_out;
rt->dst.input = ip6_pkt_prohibit;
break;
@ -157,7 +157,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
case RTN_THROW:
case RTN_UNREACHABLE:
default:
@@ -4418,6 +4437,17 @@ static int ip6_pkt_prohibit_out(struct n
@@ -4426,6 +4445,17 @@ static int ip6_pkt_prohibit_out(struct n
return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
}
@ -175,7 +175,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
/*
* Allocate a dst for local (unicast / anycast) address.
*/
@@ -4898,7 +4928,8 @@ static int rtm_to_fib6_config(struct sk_
@@ -4906,7 +4936,8 @@ static int rtm_to_fib6_config(struct sk_
if (rtm->rtm_type == RTN_UNREACHABLE ||
rtm->rtm_type == RTN_BLACKHOLE ||
rtm->rtm_type == RTN_PROHIBIT ||
@ -185,7 +185,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
cfg->fc_flags |= RTF_REJECT;
if (rtm->rtm_type == RTN_LOCAL)
@@ -6068,6 +6099,8 @@ static int ip6_route_dev_notify(struct n
@@ -6076,6 +6107,8 @@ static int ip6_route_dev_notify(struct n
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
net->ipv6.ip6_prohibit_entry->dst.dev = dev;
net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
@ -194,7 +194,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
#endif
@@ -6079,6 +6112,7 @@ static int ip6_route_dev_notify(struct n
@@ -6087,6 +6120,7 @@ static int ip6_route_dev_notify(struct n
in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev);
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev);
@ -202,7 +202,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev);
#endif
}
@@ -6270,6 +6304,8 @@ static int __net_init ip6_route_net_init
@@ -6278,6 +6312,8 @@ static int __net_init ip6_route_net_init
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
net->ipv6.fib6_has_custom_rules = false;
@ -211,7 +211,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
net->ipv6.ip6_prohibit_entry = kmemdup(&ip6_prohibit_entry_template,
sizeof(*net->ipv6.ip6_prohibit_entry),
GFP_KERNEL);
@@ -6280,11 +6316,21 @@ static int __net_init ip6_route_net_init
@@ -6288,11 +6324,21 @@ static int __net_init ip6_route_net_init
ip6_template_metrics, true);
INIT_LIST_HEAD(&net->ipv6.ip6_prohibit_entry->rt6i_uncached);
@ -234,7 +234,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
ip6_template_metrics, true);
@@ -6311,6 +6357,8 @@ out:
@@ -6319,6 +6365,8 @@ out:
return ret;
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
@ -243,7 +243,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
out_ip6_prohibit_entry:
kfree(net->ipv6.ip6_prohibit_entry);
out_ip6_null_entry:
@@ -6330,6 +6378,7 @@ static void __net_exit ip6_route_net_exi
@@ -6338,6 +6386,7 @@ static void __net_exit ip6_route_net_exi
kfree(net->ipv6.ip6_null_entry);
#ifdef CONFIG_IPV6_MULTIPLE_TABLES
kfree(net->ipv6.ip6_prohibit_entry);
@ -251,7 +251,7 @@ Signed-off-by: Jonas Gorski <[email protected]>
kfree(net->ipv6.ip6_blk_hole_entry);
#endif
dst_entries_destroy(&net->ipv6.ip6_dst_ops);
@@ -6407,6 +6456,9 @@ void __init ip6_route_init_special_entri
@@ -6415,6 +6464,9 @@ void __init ip6_route_init_special_entri
init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);

Loading…
Cancel
Save